Zep Commercial ZUWLFF5G Wet-Look Floor Finish 5-Gallon for High Shine

Now, you can get a great looking, high-gloss finish that also protects against scuffs and is slip resistant. Zep Commercial® Wet-Look Floor Finish is formulated for easy application and minimal maintenance. The long-lasting shine has a clear, polished look and is tough enough to maintain with UHS burnishing. This is st

Now, you can get a great looking, high-gloss finish that also protects against scuffs and is slip resistant. Zep Commercial® Wet-Look Floor Finish is formulated for easy application and minimal maintenance. The long-lasting shine has a clear, polished look and is tough enough to maintain with UHS burnishing. This is step #3 of the Zep Commercial® 4-step floor maintenance program.

• Size: 5 Gallon
• Covers up to 10,000 sq. ft.
• Dries in 30 minutes
• Contains 19% solids
• Formulated to dry quickly into a high gloss “Wet Look”
• Resists scuffs and black heel marks
• Responds excellently to ultra high speed burnishing for moderate maintenance procedures
• For use on interior floors such as rubber, asphalt tile, vinyl composition, sealed concrete, terrazzo and no-wax vinyl.

Ingredients:

• DIPROPYLENE GLYCOL METHYL ETHER; dipropylene glycol monomethyl ether 2-(2-ETHOXYETHOXY)-ETHANOL; diethylene glycol monoethyl ether, ethoxydiglycol Handling and Storage: Put on appropriate personal protective equipment. Workers should wash hands and face before eating, drinking and smoking. Do not get in eyes or on skin or clothing. Use with adequate ventilation. Do not ingest. Do not reuse container. Store in accordance with local regulations. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Protect from freezing. Store between the following temperatures: 40°F and 120°F (4.4°C and 49°C).

Instructions:

• Strip floor using Zep Commercial® Heavy-Duty Floor Stripper. Apply 1-2 coats of Zep Commercial® Stain-Resistant Floor Sealer. Allow floor to dry. Apply 4 thin coats of Zep Commercial® Wet Look Floor Finish. Allow floor to dry between coats; approximately 30 minutes under normal conditions. Zep Commercial® Wet Look Floor Finish should be maintained by frequent dust mopping and daily damp mopping with Zep Commercial® Neutral Floor Cleaner. Keep floor dust free. Maintain by dry burnishing with a beige pad. Best results are obtained if burnished 2 to 3 times each week. This product is able to be stripped and reapplied as needed.

Pro Tips:

• Step #3 (part two) in the Floor Care 4 Step Process. For best results, dry burnish with a beige pad three times a week. To periodically rejuvenate the gloss, use a ultra high-speed burnisher with a natural beige pad.

Be Safe:

Use the following safety equipment when using this product.

• Gloves
• Glasses
• Ventilation

Specifications

MFR: ZUWLFF5G SKU: 11348251 UPC: 021709014488 Brand: Zep Commercial Length: 12 Width: 10 Height: 15