Hammerite Rust Cap 48300 Rust Preventative Paint 1 Quart for Metal Protection

Hammerite rust cap galvanized and aluminum primer is an interior / exterior acrylic latex undercoater that’s formulated to bond to galvanized metal, aluminum, tin and other smooth metal surfaces.  Highlights: Quart Gray primer Hammered finish Self-priming Can be applied directly over firm rusty surfaces Dry to touch in

Hammerite rust cap galvanized and aluminum primer is an interior / exterior acrylic latex undercoater that’s formulated to bond to galvanized metal, aluminum, tin and other smooth metal surfaces.

 Highlights:

• Quart
• Gray primer
• Hammered finish
• Self-priming
• Can be applied directly over firm rusty surfaces
• Dry to touch in 30 minutes
• Do not tint or intermix with other paints
• Can 

Where to Use:

• Use on metal, aluminum, tin and other smooth metal surfaces.

Surface Preparation:

• Surfaces to be coated must be clean, dry and free of oil, grease, mildew, wax, dust, flaky rust, mill scale, loose paint, chalk and other foreign matter that could interfere with adhesion. Remove loose rust, peeling paint and mill scale with a scraper, wire brush or sandpaper.
• Clean bare metal with VM&P Naphtha.
• Scuff sand rusted, glossy or hard surfaces.
• Protect adjacent surfaces from overspray.

Application: 

• Stir this product to achieve a uniform mixture
• Apply with nylon brush, roller or spray
• A one-coat application of Hammerite rust cap primer with a Hammerite rust cap enamel finish topcoat protects and preserves the surface
• Two coats provide greater durability with other topcoat finishes
• Thinning is not recommended, but if necessary to ease brushing or rolling, one pint of clean water can be added per gallon. Do not overthin
• Do not mix this product with other paints or thinners. Do not apply when air and surface temperatures are below 50°F or above 90°F

Dry Time & Coverage:

• Dries to touch in 1-2 hours
• Allow to dry 24 hours before applying finish coat
• 350-400 square feet per gallon, depending on porosity or surface texture of substrate
• Estimate job accurately to ensure proper coverage and protection while minimizing excess paint (disposal)

Clean Up & Disposal:

• Clean equipment and paint spatters with warm, soapy water
• If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations
• Do not dispose of this product down a drain
• Please consider donating any unused product
• For recycling or disposal information, contact your local household refuse collection service

WARNING: This product can expose you to chemicals including Ethylbenzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Specifications

MFR: 48300 SKU: 12044859 UPC: 051652483000 Brand: Hammerite Length: 3 Width: 6 Height: 6